Machine for transporting and charging drills and wells with granular explosives (ANFO) BAC2x500
Blasting operations are a labor-intensive and safety-critical process in mining operations. Delivering explosives to the work site and loading them into boreholes and boreholes is an integral part of blasting preparation, requiring significant time and labor.
With high safety and productivity requirements in mind, Titan Makina has developed and manufactures a range of specialized self-propelled vehicles for transporting and loading explosives in mines.
These vehicles are designed to meet safety requirements for loading equipment. They are equipped with loading equipment for granular and emulsion explosives.
Ergonomic controls, a mechanical feed system for the charging hose, containers for transporting explosives and initiating agents, and a wide boom area make these machines not only indispensable assistants but also significantly improve the quality of loading.
|
DIMENSIONS |
|
BOOM and BASKET |
||
|
Length |
9,900 mm. |
|
Maximum vertical reach |
5.8 m |
|
Width |
2,100 mm. |
|
Maximum horizontal reach |
8.0 m |
|
Height |
2,450 mm. |
|
Basket size |
1.5 x 0.8 m |
|
Clearance |
350 mm. |
|
Boom Swing Angle |
+/- 35⁰ |
|
Turning Radius (Outer) |
7,050 mm. |
|
Basket Tilt |
+/- 5⁰ |
|
Turning Radius (Inner) |
4,200 mm. |
|
Basket Load Capacity |
500 kg |
|
CHARGER |
|
CHARGER |
||
|
ANFO Tank Capacity |
2 x 500 l |
|
Charging hose diameter |
26/33 mm |
|
Wetting water tank |
160 l |
|
Charging hose length |
25 m |
|
Vacuum pump for filling ANFO |
|
Charging hose reel |
25 m |
|
|
ANFO receiving hopper in front of the cab |
|
Foot/hand charging control |
||
|
DRIVE / TRANSMISSION |
|
COMPRESSOR |
||
|
Deutz TCD engine 2013 L4 |
129 kW |
|
Compressor with hydraulic drive T12 |
7.0 m3/min |
|
Dana Spicer T24 000 Series hydraulic motor |
|
Receiver |
80 l. |
|
|
Dana Spicer 113 Axles |
|
Performance |
7.0 m3/min |
|
|
Tire Size |
12.00 - 20 |
|
Maximum pressure |
7 bar |
|
FIRE EXTINGUISHING / LUBRICATION SYSTEM |
|
24V ELECTRICAL SYSTEM |
||
|
Centralized manual lubrication system |
|
Electrical equipment protection level. |
IP65 |
|
|
Automatic Centralized Lubrication System (Optional) |
|
Battery |
2x105 Ah |
|
|
ANSUL Automatic and Manual Fire Suppression System (Optional) |
|
LED headlights - forward |
6 pcs |
|
|
Fire extinguisher |
10 kg |
|
LED headlights - rear |
6 pcs |
|
CABIN |
|
OPTIONS |
|
Enclosed, glass, 3-seat cab meets ROPS/FOPS standards. |
|
Hand pump for emergency brake release |
|
Multifunction display shows: speed, rpm, engine hours, fluid levels, temperature, pressure, alarms, and error codes. |
|
Electric pump (24V) for filling hydraulic, transmission, and engine oils. |
|
Rearview camera – in-cab monitor |
|
Wi-Fi data recording and transmission |
|
Heated cab (Standard) |
|
DVR |
|
Air-conditioned cab (Optional) |
|
Collision Mitigation System |
|
Windshield Protection |
|
Methane Monitoring Equipment |
- Hand pump for emergency vehicle brake release
- Electric pump (24V) for filling hydraulic, transmission, and engine oils.
- Data recording and transmission via Wi-Fi
- DVR
- Collision avoidance system
- Methane content monitoring equipment